R-22 Is Gone. R-410A Is Next. What Riverside County Homeowners Need to Know About Refrigerant Changes

AC Repair

R-22 Is Gone. R-410A Is Next. What Riverside County Homeowners Need to Know About Refrigerant Changes

The refrigerant in your AC system has a bigger impact on your wallet than you might think. Here's what the phase-out of R-22 and R-410A means for your home and your options going forward.

R
Revive Heating & Air Conditioning
••4 min read
R-22 Is Gone. R-410A Is Next. What Riverside County Homeowners Need to Know About Refrigerant Changes

If you've had your AC serviced in the last few years, you may have heard your technician mention refrigerant — specifically that it's getting expensive, or that your system uses a type that's being phased out. This isn't just industry jargon. Refrigerant regulations have real consequences for homeowners, and understanding them can help you make smarter decisions about your HVAC system.

A Quick Primer: What Is Refrigerant?

Refrigerant is the chemical that makes air conditioning possible. It cycles through your system, absorbing heat from inside your home and releasing it outside. Without refrigerant, your AC is just a very expensive fan.

The type of refrigerant your system uses is determined by when it was manufactured. Different generations of AC systems use different refrigerants — and the older ones are being phased out for environmental reasons.

R-22 (Freon): Already Gone

If your AC system was manufactured before 2010, it almost certainly uses R-22, also known by the brand name Freon. R-22 is a hydrochlorofluorocarbon (HCFC) that damages the ozone layer.

The U.S. banned the production and import of R-22 on January 1, 2020. Only recycled or reclaimed R-22 is still available — and the supply is shrinking fast.

What this means for you: If your R-22 system develops a refrigerant leak, recharging it is extremely expensive — often $100–$150 per pound, and a typical system holds 6–12 pounds. Many homeowners with R-22 systems find that a leak repair plus recharge costs more than replacing the system entirely.

Our recommendation: If you have an R-22 system and it's still running well, enjoy it while it lasts. But don't invest heavily in repairs. When it fails, replace it.

R-410A: The Phase-Down Is Underway

Systems manufactured from roughly 2010 through 2024 use R-410A, which was the industry's answer to R-22. R-410A doesn't damage the ozone layer — but it has a very high global warming potential (GWP), about 2,088 times that of CO2.

Under the AIM Act, the EPA is phasing down R-410A production. New residential AC systems manufactured after January 1, 2025 can no longer use R-410A. Systems already in the field can still be serviced with R-410A, but production limits will drive prices up over time.

What this means for you: If you have an R-410A system, you're fine for now. Refrigerant is still available and reasonably priced. But if your system is approaching 10–12 years old and needs a major repair, it's worth factoring in that servicing costs will rise as R-410A becomes less available.

The New Standard: R-454B and R-32

New systems manufactured from 2025 onward use next-generation refrigerants like R-454B (sold as Puron Advance) and R-32. These have much lower global warming potential while maintaining similar performance to R-410A.

If you're buying a new system today, it will use one of these newer refrigerants. They're not interchangeable with R-410A — the systems are designed specifically for them.

What Should You Do?

If your system uses R-22:

  • Don't invest in major repairs
  • Budget for replacement in the near term
  • When you replace, go with a new R-454B or R-32 system for maximum longevity

If your system uses R-410A:

  • Keep up with maintenance to avoid leaks
  • If it's under 8 years old and running well, no action needed
  • If it's 10+ years old, start planning for eventual replacement

If you're buying new:

  • Make sure the system uses R-454B or R-32 — not R-410A
  • Ask your contractor specifically about the refrigerant type before signing

Questions? We Can Help

Refrigerant regulations are genuinely confusing, and the stakes are high. If you're not sure what refrigerant your system uses, whether a repair makes financial sense, or what to look for in a new system, Revive Heating & Air Conditioning is happy to walk you through it.

We serve all of Riverside County — from Murrieta and Temecula to Hemet, Palm Desert, and beyond. Give us a call and we'll give you a straight answer.

Need help with your HVAC system? Revive Heating & Air Conditioning offers AC repair throughout Riverside County. Serving Menifee, Murrieta, and Temecula — call (951) 206-4975.

Explore Topics

#refrigerant#R-22#R-410A#R-454B#AC repair#Riverside County#HVAC replacement#energy efficiency

Share this article

R

Written by

Revive Heating & Air Conditioning

Revive Heating & Air Conditioning is a family-owned HVAC company serving Riverside County, CA. Licensed (CSLB #1146947) and trusted by homeowners across Menifee, Temecula, Murrieta, and surrounding communities for AC repair, heating, installations, and maintenance.

Get My PriceBook OnlineCall Revive Now