Wildfire Smoke and Your HVAC: How to Protect Your Home's Air Quality

Air Quality

Wildfire Smoke and Your HVAC: How to Protect Your Home's Air Quality

When wildfire smoke rolls into Riverside County, your HVAC system becomes your first line of defense — or your biggest liability. Here is what to do before, during, and after a smoke event.

R
Revive Heating & Air Conditioning
••5 min read
Wildfire Smoke and Your HVAC: How to Protect Your Home's Air Quality

Wildfire Smoke and Your HVAC: How to Protect Your Home's Air Quality

Wildfire season in Southern California is a reality that Riverside County homeowners know well. When smoke rolls in from fires in the San Bernardino Mountains, the Inland Empire, or anywhere across the region, the air quality outside can drop to hazardous levels within hours. Your HVAC system plays a critical role in whether that smoke stays outside — or ends up circulating through every room in your home.

Here is what you need to know.

Why Your HVAC Matters During Smoke Events

Your air conditioner does more than cool the air — it also filters it. Every time your system runs, air is pulled through a filter before it is distributed through your home. During a wildfire smoke event, that filter becomes your primary defense against PM2.5 particles, the microscopic particles in smoke that are most dangerous to breathe.

The problem is that most standard 1-inch filters are not designed to catch smoke particles effectively. And if your system is set to bring in fresh air from outside, it could actually be pulling smoky air directly into your home.

Step 1: Check Your Filter — Right Now

If you have a standard fiberglass or low-MERV filter (MERV 1–4), it will do almost nothing to stop smoke particles. During a smoke event, you want at minimum a MERV 11 or MERV 13 filter. These are rated to capture particles as small as 1 micron, which covers most smoke particulate.

What to do:

  • Check your current filter's MERV rating (it is printed on the frame)
  • If it is below MERV 11, replace it before or immediately during a smoke event
  • Have a spare MERV 13 filter on hand during fire season — they sell out fast at hardware stores

One important note: higher-MERV filters restrict airflow more than standard filters. If your system is older or your blower is not powerful enough, a MERV 13 filter can strain the system. Call us if you are unsure — we can tell you the highest MERV rating your system can handle safely.

Step 2: Set Your System to Recirculate

Most HVAC systems have a setting that controls whether they pull in fresh outside air or recirculate indoor air. During a smoke event, you want recirculation mode — this keeps the system from pulling smoky outdoor air inside.

On your thermostat, look for a "Fresh Air," "Ventilation," or "Outside Air" setting and turn it off. If you have an energy recovery ventilator (ERV) or heat recovery ventilator (HRV), close the outdoor air damper manually or switch it to recirculation mode.

Step 3: Run Your System More, Not Less

A common mistake homeowners make during smoke events is turning the AC off to "save energy" or because it feels cool enough outside. This is the wrong call. Running your system keeps air moving through the filter, which means more filtration cycles per hour.

If the temperature is mild enough that you do not need cooling, you can run the fan only — set your thermostat to "Fan On" instead of "Auto." This circulates air through the filter without running the compressor.

Step 4: Seal Up Your Home

Your HVAC system can only filter the air that passes through it. If smoke is seeping in through gaps around windows, doors, or fireplace dampers, you are fighting a losing battle.

During a heavy smoke event:

  • Close all windows and doors
  • Close your fireplace damper completely
  • Use door draft stoppers if you have them
  • Avoid opening doors more than necessary

Step 5: Consider a Portable Air Purifier for Bedrooms

Even a well-maintained HVAC system with a MERV 13 filter may not be enough during a severe smoke event. A portable HEPA air purifier in your bedroom adds a second layer of filtration where it matters most — where you sleep.

Look for a purifier with a true HEPA filter (not "HEPA-type") and a CADR (Clean Air Delivery Rate) appropriate for the room size.

After the Smoke Clears: What to Do

Once air quality returns to normal, replace your filter — even if it has not been in use long. Smoke-laden filters can release captured particles back into the air as they dry out, and they restrict airflow more than a clean filter.

Also inspect your outdoor condenser unit. Ash and debris can accumulate on the coil fins and reduce efficiency. A quick rinse with a garden hose (system off) can help, but if you notice significant buildup, schedule a professional cleaning.

Riverside County Fire Season Prep Checklist

  • Stock MERV 13 filters in your filter size
  • Know how to switch your system to recirculation mode
  • Have a portable HEPA purifier for the bedroom
  • Keep fireplace damper closed during smoke events
  • Schedule a post-fire-season HVAC tune-up

Revive Heating & Air Conditioning serves Riverside County homeowners year-round — including during fire season. If you have questions about your system's filtration capability or want to upgrade to a whole-home air purification system, give us a call at (951) 206-4975.

Need help with your HVAC system? Revive Heating & Air Conditioning offers HVAC maintenance throughout Riverside County. Serving Menifee, Murrieta, and Temecula — call (951) 206-4975.

Explore Topics

#wildfire smoke#air quality#HVAC filter#Riverside County#indoor air quality#smoke season#MERV filter#air purifier

Share this article

R

Written by

Revive Heating & Air Conditioning

Revive Heating & Air Conditioning is a family-owned HVAC company serving Riverside County, CA. Licensed (CSLB #1146947) and trusted by homeowners across Menifee, Temecula, Murrieta, and surrounding communities for AC repair, heating, installations, and maintenance.

Get My PriceBook OnlineCall Revive Now