How to Lower Your Electric Bill While Running AC All Summer — Riverside County
Running AC in Riverside County all summer can mean $300–$500 electric bills. Here are 12 proven ways to stay cool and cut your energy costs — without sweating through the heat.
How to Lower Your Electric Bill While Running AC All Summer — Riverside County
Summer in Riverside County is long, hot, and expensive. When temperatures stay above 90°F for weeks at a time, your air conditioner runs almost constantly — and your electric bill shows it. Many Riverside County homeowners see bills of $300–$500 or more during peak summer months.
The good news: you don't have to choose between comfort and affordability. These 12 strategies can realistically cut your summer cooling costs by 20–40% without making your home uncomfortable.
1. Set Your Thermostat to 78°F When Home (Not Lower)
The single biggest driver of your summer electric bill is your thermostat setting. Every degree you lower the thermostat increases your cooling costs by approximately 3%.
The math:
- Cooling to 72°F vs. 78°F = roughly 18% more energy
- On a $400 summer bill, that's $72/month just from those 6 degrees
The sweet spot for Riverside County: 78°F when home, 85°F when away, 82°F when sleeping. These settings balance comfort with efficiency in our climate.
Use a programmable or smart thermostat to automate these setbacks. A smart thermostat like the Ecobee or Nest can learn your schedule and optimize cooling automatically — most pay for themselves in energy savings within one year.
2. Pre-Cool Your Home Before Peak Rate Hours
If you're on a time-of-use (TOU) electricity rate with Southern California Edison — which many Riverside County customers are — electricity costs significantly more during peak hours (typically 4–9 PM on weekdays).
The strategy: Pre-cool your home to 74–76°F before 4 PM, then let it drift up to 80°F during peak hours. Your home's thermal mass (walls, furniture, flooring) holds the cool temperature for 2–3 hours, so you stay comfortable without running the AC hard during the most expensive hours.
Check your SCE rate plan at sce.com — switching to a TOU plan and pre-cooling can save $30–$80/month for many households.
3. Change Your Air Filter Every 30–45 Days
A dirty air filter is one of the most common causes of high energy bills. When airflow is restricted, your system runs longer to move the same amount of cool air — and longer runtime means higher bills.
In Riverside County's dusty, high-pollen environment, filters clog faster than in other climates. During summer, check your filter monthly and replace it when it looks gray or you can't see light through it.
Filter cost: $10–$30 per filter Potential savings: 5–15% on cooling costs
4. Use Ceiling Fans to Feel 4°F Cooler
Ceiling fans don't cool the air — they cool you by creating a wind-chill effect. Running a ceiling fan allows you to raise your thermostat by 4°F without feeling any warmer.
Important: Ceiling fans only help when someone is in the room. Turn them off when you leave — a fan running in an empty room wastes electricity and adds heat.
Make sure fans spin counterclockwise in summer (when you stand below and look up, blades should move counterclockwise). This pushes air straight down, creating the cooling breeze effect.
5. Block Heat Gain Through Windows
Up to 30% of your home's heat gain in summer comes through windows — especially west and south-facing windows that get direct afternoon sun. In Riverside County, this is a major factor.
Most effective solutions:
- Cellular shades or blackout curtains: Close them on west and south windows from noon onward. This alone can reduce cooling load by 10–15%.
- Solar screens or window film: Blocks 65–90% of solar heat gain while maintaining visibility. One-time installation, permanent benefit.
- Exterior shading: Awnings, patio covers, or shade trees on the west and south sides of your home are the most effective long-term solution.
6. Seal Air Leaks Around Doors and Windows
Cool air escaping through gaps around doors, windows, and electrical outlets forces your AC to run longer. In older Riverside County homes, air leaks can account for 15–25% of cooling energy waste.
Easy DIY fixes:
- Weatherstripping on door frames (replace if you can feel air movement)
- Door sweeps on exterior doors
- Foam gaskets behind outlet and switch plates on exterior walls
- Caulk around window frames where they meet the wall
Cost: $50–$200 in materials for most homes Potential savings: 10–20% on cooling costs
7. Have Your AC Serviced Before Peak Season
A well-maintained AC system runs more efficiently than a neglected one. Annual maintenance typically includes:
- Cleaning the evaporator and condenser coils
- Checking refrigerant levels
- Lubricating moving parts
- Inspecting electrical connections
- Cleaning the condensate drain
Efficiency impact: A dirty condenser coil alone can reduce system efficiency by 20–30%. A system running at 80% efficiency costs 25% more to operate than one running at 100%.
Timing: Schedule maintenance in March or April — before the summer rush. Revive Heating & Air Conditioning offers maintenance plans that include annual tune-ups and priority service.
8. Check and Seal Your Ductwork
Leaky ducts are one of the most overlooked sources of energy waste. Studies show the average home loses 20–30% of conditioned air through duct leaks — meaning you're paying to cool your attic, not your living room.
Signs of duct leaks:
- Some rooms are much harder to cool than others
- High energy bills despite a newer, efficient system
- Dusty rooms even with regular filter changes
What to do: Have a professional duct inspection and pressure test. Duct sealing (using mastic sealant or metal foil tape) can dramatically improve efficiency. In Riverside County's hot attics, properly sealed and insulated ducts make a significant difference.
9. Reduce Internal Heat Sources
Everything that generates heat inside your home makes your AC work harder. Small changes add up:
Kitchen:
- Use the microwave or outdoor grill instead of the oven during peak heat hours
- Run the dishwasher at night (it generates heat and humidity)
- Keep the refrigerator coils clean (dirty coils generate more heat)
Laundry:
- Wash clothes in cold water
- Run the dryer at night or early morning
- Consider a clothesline for summer — Riverside County's dry heat is perfect for it
Lighting:
- Replace any remaining incandescent bulbs with LED — incandescents convert 90% of their energy to heat
- Turn off lights in unoccupied rooms
10. Use Your Attic Fan or Whole-House Fan
If your home has a whole-house fan or attic fan, use it strategically:
Whole-house fan: On cooler evenings (when outdoor temp drops below 75°F), open windows and run the whole-house fan to flush hot air out of the house and pull in cool night air. This can cool your home to 70–72°F overnight without running the AC at all.
Attic fan: Keeps attic temperatures lower, which reduces heat transfer through your ceiling into living spaces. An attic that reaches 150°F without ventilation vs. 110°F with a fan makes a measurable difference in cooling load.
11. Upgrade to a High-Efficiency System
If your AC is more than 10–12 years old, it's likely running at 10–14 SEER (the old rating scale) — equivalent to about 9–13 SEER2 under current standards. Modern systems run at 15–22 SEER2.
The savings:
- Upgrading from a 10 SEER system to a 17 SEER2 system = approximately 40% reduction in cooling energy use
- On a $400/month summer bill, that's $160/month in savings
- A $10,000 system replacement can pay back in 5–7 years through energy savings alone — plus you may qualify for utility and state rebates through SCE and TECH Clean California
12. Consider Zoning or a Mini Split for Problem Areas
If one room or area of your home is always hotter than the rest — a bonus room over the garage, a room with lots of west-facing windows, a converted ADU — a ductless mini split for that zone can be more efficient than trying to cool the whole house to compensate.
Mini splits are highly efficient (many exceed 20 SEER2), provide precise temperature control, and don't require ductwork. They're ideal for Riverside County homes with problem rooms or additions.
Frequently Asked Questions
What temperature should I set my AC in summer to save money?
78°F when home is the Department of Energy's recommendation for comfort and efficiency. In Riverside County's dry heat, most people find 78°F comfortable with ceiling fans running. Set it to 85°F when away and 82°F at night.
Does closing vents in unused rooms save energy?
No — and it can actually hurt efficiency. Closing vents increases static pressure in the duct system, which makes your blower motor work harder and can cause the evaporator coil to freeze. Keep all vents open.
How much does it cost to run AC all day in Riverside County?
At SCE's average summer rate of approximately $0.28–$0.35/kWh, a 3-ton (3.5 kW) AC system running 8 hours costs roughly $7–$10/day. Running 12 hours/day for 90 days = $750–$1,080 just for cooling. Efficiency improvements directly reduce this number.
Is it cheaper to leave AC on all day or turn it off?
In Riverside County's extreme summer heat, leaving AC on (at a higher setback temperature like 85°F) is usually more efficient than turning it off completely. Re-cooling a house that's reached 100°F+ inside takes significantly more energy than maintaining a setback temperature. Use a programmable thermostat to automate this.
What's the most cost-effective HVAC upgrade for energy savings?
For most Riverside County homeowners, the highest-ROI upgrades in order are: (1) smart thermostat, (2) air sealing and duct sealing, (3) attic insulation, (4) high-efficiency AC replacement. A smart thermostat costs $150–$300 installed and typically saves $100–$200/year.
Save Money This Summer — Start With a Tune-Up
The fastest way to improve your AC's efficiency is a professional tune-up. Revive Heating & Air Conditioning's maintenance service includes coil cleaning, refrigerant check, electrical inspection, and a full system efficiency assessment.
Call (951) 206-4975 or book online. We serve all of Riverside County — Menifee, Temecula, Murrieta, Hemet, San Jacinto, Perris, Wildomar, Lake Elsinore, Canyon Lake, Sun City, Moreno Valley, Riverside, Corona, Norco, Eastvale, Jurupa Valley, Beaumont, Banning, Winchester, French Valley, Fallbrook, and Escondido.
Licensed, insured, CSLB #1146947.
Need help with your HVAC system? Revive Heating & Air Conditioning offers HVAC maintenance throughout Riverside County. Serving Menifee, Murrieta, and Temecula — call (951) 206-4975.
Explore Topics
Share this article
Written by
Revive Heating & Air Conditioning
Revive Heating & Air Conditioning is a family-owned HVAC company serving Riverside County, CA. Licensed (CSLB #1146947) and trusted by homeowners across Menifee, Temecula, Murrieta, and surrounding communities for AC repair, heating, installations, and maintenance.